NEW: support for guest signature dynamic element type in templates
NEW: connected cameras can have a different White-Balance for liveview versus capture
IMPROVED: "Take More" can now be set to a number/limit instead of just on/off
IMPROVED: uploaded photos now have the capture date/time encoded in EXIF data
FIXED: when using the device's camera, ISO and Shutter Speed are now independent settings, giving you far more control over your device camera
FIXED: an issue that could cause printing to fail if the Print.Events PC and the iPad had a complex networking setup
FIXED: an issue that could cause prints to timeout and fail over hotspot or direct-ethernet connections
FIXED: the printing troubleshooter could show an empty state if location access was denied
FIXED: several cases where you could launch an out-of-app process from a Remote-In session, which would lock you out of Remote-In until someone was physically at the iPad
FIXED: a brightness flicker when using the device's camera in very bright situations (like sunlight)
FIXED: an issue with the exposure slider stalling in mid-adjustment
FIXED: the camera settings screen could show a choppy liveview (low framerate) when using the device camera
FIXED: auto-generated GIFs from taking multiple photos were uploaded to the gallery but did not show on the iPad (ie. while entering share information)
FIXED: if your passcode is a number the keypad could cover the alert buttons
FIXED: long button labels could get truncated on smaller iPads
7/2/2026
📱 iOS app 1.55.1 released on App Store
NEW: new event capture types auto-configure from templates - the first time you open an event's settings, its enabled capture types are automatically set to match what the assigned templates actually support, so the launch checklist passes without manual setup
NEW: manual print alongside auto-print - new "allow manual print with auto print" option keeps the manual print button available even when auto-print is turned on
NEW: pending-uploads reminder - a stronger notification, plus an app-icon badge, when media is still waiting to upload; it now re-fires when you bring the app to the foreground
NEW: support for the all-caps setting on dynamic elements of your templates
IMPROVED: reshoot & back button placement - repositioned across Mac and the scenes, filters, and stickers flows, with a centered "Reshoot" pill in the AI gender-selection card
FIXED: photo-capture-failed modal - fix to avoid getting stuck with no capture buttons showing
6/22/2026
📱 iOS app 1.55.0 released on App Store
NEW: AircastPro3 users will now see media remaining and hardware info on their printers
NEW: manual ISO control for iPhone/iPad cameras
NEW: support for dynamic elements in templates
IMPROVED: you can now pinch-to-zoom the test photos you make on the camera settings page
FIXED: Nikon cameras with a freshly formatted card would not load photos until there was at least one photo on the card first when the camera first connected
FIXED: if you hit the back arrow from AI Portraits, in some cases the buttons on the home screen would be missing
FIXED: using the Exposure slider with iPhone/iPad camera was not working after making specific changes like changing which camera was in use
FIXED: if you had a numeric passcode, the numpad would display twice when accessing the in-event menu
FIXED: the gallery view and Share Station views could have grey squares that got stuck
FIXED: when scrolling the gallery view or Share Station view very quickly, it could take a long time for the images to load
FIXED: the attract screen could show when it should not on a Mac
FIXED: when turning off the setting to add templated copy of image to the AI photo session, the template preview shown on the screen was cropped incorrectly
💃 Vous pouvez désormais ajouter des éléments dynamiques à vos modèles - parfait pour créer des cartes à collectionner
6/17/2026
🪵 Le Journal d'audit vous montre l'historique de l'activité sur votre compte
🫰 L'éditeur de modèles bénéficie de plusieurs améliorations, dont l'aimantation et les repères d'alignement
🍦 Les abonnés Pro+ peuvent désormais modifier leur nombre de licences iPad/Mac depuis la page Facturation
🔗 Envoyez à vos clients un lien direct vers le téléchargement du ZIP de la galerie depuis la page Événement, et nous avons simplifié le processus de création du ZIP
👷♂️ Les utilisateurs Pro+ disposent désormais d'un content builder plus simple pour ajouter du contenu personnalisé à leurs pages de galerie et de session - cela remplace le réglage « HTML personnalisé » de la page de modification d'événement
6/3/2026
❗ iOS 17.2 est désormais la version minimale. Nous ne prenons pas en charge les versions antérieures.
📱 iOS app 1.54.0 released on App Store
NEW: in camera settings, all capture types have a separate option to mirror the output, for both device camera and connected (USB) camera
NEW: in camera settings, the liveview mirroring setting now has an extra option: you can mirror both the camera feed and the template preview (for single-shot templates)
FIXED: SP-107E LED controller was not working reliably
FIXED: Boomerangs on connected cameras in portrait orientations were not working
FIXED: Slow-mos on high-FPS connected cameras like the Canon R6 II, which shoot HFR video, were not working
FIXED: white-balance setting on Canon M50 was not working, potentially causing other issues when switching from one capture type to another
5/28/2026
📱 iOS app 1.53.3 released on App Store
NEW: Orcavue 360 BLE integration. Make sure bluetooth is turned on: check the in-event menu when an Orcavue 360 booth is within range
NEW: tap to see a photos full screen
CHANGED: by default the ICC color profile is no longer applied for CUPS printing, as this was producing the wrong colors on WCM Plus. If you are printing to macOS printer sharing, or other CUPS integrations without color management like PBSCO Chips, please turn the new color profile setting on - it's on the event settings last page, in the printer settings area
FIXED: status bar was appearing when it should not
FIXED: a rare issue with camera settings
5/21/2026
📱 iOS app 1.53.2 released on App Store
NEW: the app will show a warning at the top of the screen if your connected camera's shutter speed is Bulb, because it should never be Bulb.
IMPROVED: when you've added a printer from Print.Events, you'll see the Print.Events app version and uptime. Requires newest version of Print.Events.
FIXED: attract screen was showing the settings/gear button on top of it
FIXED: when your passcode was only numbers and your iPad was landscape orientation, you couldn't enter it
FIXED: the settings/gear button shows on the Share Station too, so you can open a Share Station's in-event menu with Remote-In
FIXED: worked around an iOS 26 issue that could cause the Glam Filter to stop working
FIXED: if you used the app offline and made changes to settings, the app could later overwrite other changes that were made on the web while the device was offline
FIXED: when a camera disconnected the app could store bad settings values, for example 1" or Bulb shutter speed values. The app now only saves camera settings changes that were made in the app: if you change the settings directly on the camera the app will notice & show the value the camera is using, but it won't save or apply this on the next app restart
FIXED: if you used Remote-In while the app had a help window open, you couldn't see or close the help window, and things would get into a bad state
FIXED: if you typed your passcode in the browser while using Remote-In, a guest who was standing at the device could see your passcode
5/14/2026
📱 iOS app 1.53.1 released on App Store
NEW: for AI Photo and AI Portrait captures the template is now shown on screen during capture, and the templated version of the photo without AI is added to the gallery. Don't like it? Turn off the new "AI: add templated original, show template during capture" setting.
IMPROVED: the settings/gear icon at the top-right is always shown when someone is remotely connected, so you can still open the in-event menu if you prefer to have this icon not showing to your guests
IMPROVED: the app shows a small "Remote connected" when a remote viewer is connected
IMPROVED: the app reports its battery level to your Devices page on web dashboard
FIXED: if you signed out of your account and then signed back in, remote-in wouldn't work until you restarted the app
FIXED: some global backend-only settings were overwritten incorrectly by the app
5/12/2026
📱 iOS app 1.53.0 released on App Store
NEW: Remote-In, which lets you view & control the app from anywhere in the world with only a web-browser
NEW: Data Collection has been renamed to Surveys, and now you can have surveys before AND after capture
CHANGED: the setting for where data collection happens (before vs after capture) has been removed, as this is now done on the web
IMPROVED: using Glam Filter and taking photos with connected cameras both use less memory, which means older devices are more stable & all devices are faster
FIXED: canceling out of data collection that's after capture would still upload the photo(s) to the gallery
FIXED: printed colors were wrong when printing to a CUPS-based system with a DNP printer
FIXED: when you have only AI Prompt capture type enabled and the user cancels during image generation, the buttons were all missing
FIXED: when you set the card to appear at the top of the screen instead of the bottom, there were some minor visual glitches
FIXED: on macOS the reshoot screen was too small
FIXED: if you shot a photo directly on your camera and had no template with 1 photo area, the photo would not be downloaded
FIXED: the Glam Filter was not working correctly on macOS
FIXED: if you went to exit the event and canceled entering your passcode, the photo shot directly on your camera that was just downloaded was abandoned
🌐 Remote-In vous permet de voir et de piloter l'application depuis n'importe où dans le monde, avec un simple navigateur.
📋 La Collecte de données a été renommée Enquêtes, et vous pouvez désormais lancer des enquêtes avant ET après la capture. Le réglage qui détermine le moment (avant ou après la capture) est passé sur le web.
4/27/2026
📱 iOS app 1.52.0 released on App Store
NEW: 360 Slow-mos 2.0! Set up your custom timings on the Template on the web dashboard
NEW: auto-start your 360 Slow-mo when your spinner booth starts spinning (motion detection), and now you can cancel a slow-mo mid-capture
NEW: set the boomerang recording duration
IMPROVED: slow-mo quality and video output quality, especially for 240 FPS slow-mos
IMPROVED: Our AI Glam Filter just keeps getting better - now it'll work when your guests have struck really unusual poses, and the teeth whitening is more realistic
FIXED: when the crop originals setting was on, the original photos shown on the screen for AI Photos and AI Portraits were cropped when they shouldn't be. This setting has been fixed to no longer apply to AI Photos and AI Portraits.
FIXED: when guests scrolled the buttons in the white area, the buttons would sometimes instead register the scroll as a touch
FIXED: hitting the "Done" button could be broken if you started the capture from your camera
FIXED: the guest idle timeout could fail in a few specific scenarios involving data collection
FIXED: you could see "0 more!" text when you like... totally should not ever see that
FIXED: after going back from an AI photo/portrait or Data Collection, the screen could be blank
FIXED: a rare crash on opening camera settings
4/9/2026
📱 iOS app 1.51.1 released on App Store
NEW: when seeing a generated AI photo there's now a back arrow for guests who want to abandon the photo
IMPROVED: our often-imitated never-duplicated Glam filter is better than ever. In this update we've improved the way the glam filter blends in at the neckline.
IMPROVED: a small indicator is shown at the bottom-left of the screen when a camera is in the process of connecting, so that when you plug in a camera you can see the app reacting sooner
IMPROVED: on macOS you can now use the on-screen keyboard to login to your account or exit an event that needs a passcode
IMPROVED: events with expired galleries are no longer listed in the iPad app, and tapping a row is now less likely to give you the "Gallery not found" error
FIXED: if a guest uses all available re-rolls for generating an AI photo and then hits the "cancel" button, this no longer cancels the entire session
FIXED: if your multi-photo template had differing aspect ratios, the liveview during capture might not correctly take up the entire width/height of the screen
FIXED: when taking multiple photos the preview boxes near the bottom during capture now show the photo in the same aspect ratio and crop as they appear in the final output
FIXED: when liveview was set to During Countdown or Off, the liveview would not show in the camera settings page
FIXED: the launch segment was defaulting to "Customize" when it should not
FIXED: if you turned on tap to continue between photos, the volume-up bluetooth trigger would not work
FIXED: an issue on iOS 17 with the status bar showing when it should not
3/30/2026
📱 iOS app 1.51.0 released on App Store
NEW: on-screen keyboard shows on macOS, allowing guests to use touchscreen-equipped Macs to enter info such as their email address
NEW: added support for Sony α1, α1 II, α9 III, α7R V, α7 IV, α7S III, α7C II, αC R, α6700, ILX-LR1, FX3, FX3A, FX30, FX2, and ZV-E1 cameras. Your camera must have the newest firmware installed. This is not a complete list: other Sony cameras may also function correctly.
NEW: added video support for Sony cameras. If your Sony only worked with photos before this update, it may now support slow-mo and video capture types as well.
NEW: added support for GoPro HERO Black cameras, series 9 and newer. Both wired and wireless connections are supported. Your GoPro must have the newest firmware installed.
NEW: support for custom white-balance settings when the camera switches between photo/slow-mo/video modes. The camera must support this: newer cameras like the Canon R100 and Sony α7 support this.
NEW: a setting to add the location to the photos/videos the app uploads
CHANGED: there's now a button on the event screen to make it easier to open the in-event menu. Don't like it? See the first page of event settings to turn it off.
IMPROVED: SceneSelect quality when background is much darker or brighter than subject
IMPROVED: you can now start & continue support cases directly in the app, by hitting the '?' at the top-right of the start screen
IMPROVED: the phone number-pad is easier to use for your guests
IMPROVED: instead of only being able to turn liveview off/on, you can now choose to have it on only during capture (template selection + countdown). This setting is automatically chosen the first time you ever connect a GoPro camera, to reduce battery usage & heat generation
FIXED: a rare issue that could cause the "Done" button to do nothing on the Gallery screen
FIXED: a rare issue that could cause the app to hang
FIXED: several cases where the "Liveview too dark?" feature would not work correctly if you canceled a capture in progress
FIXED: if you turned off idle timeout the setting would not save correctly
3/5/2026
📱 iOS app 1.50.3 released on App Store
FIXED: LED controllers would connect in the wrong profiles
FIXED: AI portrait face overlay could be displayed incorrectly
3/2/2026
📱 iOS app 1.50.2 released on App Store
IMPROVED: The guest now chooses the AI filter before the photo is taken. If more than one template has the AI filter that the guest chooses, then the guest now chooses the AI filter first, template second
IMPROVED: in the rare case that AI generation fails, now there's a "Try Again" button so the guest doesn't have to take their photo again
IMPROVED: live sync for Attract Screens, including Share Station
IMPROVED: on the LED page you can change the chip type and color order; SP107E connections no longer depend on the name of the controller; connections are always automatic if the device has connected before; "Turn On" and "Turn Off" buttons have been added to quickly adjust the LEDs
IMPROVED: when printing to a CUPS-based server the paper sizes are now correctly shown, and additional information helps you distinguish between options with cuts / no cuts
FIXED: able to print 2x6 strips on PBSCO "Chips"
FIXED: when taking AI Photo / AI Portrait, the liveview area did not match the photo taken
FIXED: for some templates the liveview would not use the full width/height of the screen when a camera was connected
FIXED: events scheduled to end more than 24 hours ago now result in the booth staying closed
FIXED: the screen could turn off if your booth was closed and you hadn't set Settings App -> lock -> never
FIXED: when a scheduled event started, the popover with the event information was not automatically dismissed
FIXED: Share Station was showing originals when that setting was turned off
FIXED: a crash if you rapidly opened and closed the add printers dialog
2/1/2026
📱 iOS app 1.50.1 released on App Store
NEW: support for direct printing over USB on macOS, and, iOS support for printing to macOS-shared printers. If you are running the app on a Mac then you must download the app directly from us, not the App Store, for Mac printing to work - for more details see the "How to: Printing on a Mac" help article.
IMPROVED: when the booth is closed and you try to access the in-event menu, the app will always ask for your passcode even if you entered it very recently
IMPROVED: on macOS a settings/gear icon appears on the home-screen, so that it is possible to open the in-event menu on touch-screens that don't support long-press
FIXED: for certain devices including macOS you no longer need to go into camera settings every time for the USB camera to be detected
FIXED: when adding a printer, the "Choose paper" option was not working correctly
FIXED: the help window could pop open on devices you aren't using, when you are having a conversation with our support team
FIXED: if a schedule change happened at the exact time a guest was in a capture session, the iPad could get stuck
FIXED: a rare problem that could cause no event to be openable on app launch - you'd get a "Gallery not found" error that would not go away
1/26/2026
🖼️ Vous pouvez désormais ajouter des images de prévisualisation aux zones photo dans l'éditeur de modèles. Cela permet de mieux voir le rendu de votre modèle pendant que vous le concevez. Pour ajouter une image de prévisualisation, sélectionnez une zone photo dans l'éditeur et cliquez sur le bouton « Ajouter une image de prévisualisation » dans la barre latérale gauche.
1/9/2026
📱 iOS app 1.50.0 released on App Store
NEW: you can open/close the booth in the in-event menu, and also from your web Dashboard -> Devices page. The screen shown when the device is closed can be customized on your web Dashboard -> Devices page.
NEW: you can schedule multiple events for each device. A countdown screen will show before an event is ready, and a closed screen will show after the event is finished. You can customize both screens on your web Dashboard -> Devices page
IMPROVED: printing to Print.Events is faster for guests because the app no longer makes them wait for the PC to respond
IMPROVED: if the reason the Print button is hidden is because you've turned off printing for all templates, we'll show the print button, let you tap it, and tell you how to fix it
FIXED: when printing to Print.Events the printer button could show an error when there was no problem, if you hit the print button many times quickly
FIXED: adding the QR code to prints was not working well when you had a slow internet connection
FIXED: if you had an eSIM from an international carrier, the phone number keypad could show the wrong flag
FIXED: several rare crashes
FIXED: you could get an alert warning about local network access when the permission was already granted
FIXED: if you started a capture session and then went back, the app could end up starting a new capture session when it should not
📋 La page Appareils affiche désormais les options de personnalisation des écrans de compte à rebours et de fermeture, affichés lorsque vous fermez la borne ou programmez un événement à venir. Cela nécessite la version 1.50.0 ou plus récente. La programmation d'événements remplace le mode kiosque. En savoir plus.
🎨 Nous avons apporté plusieurs changements à la personnalisation des galeries : ajout d'une image de fond, amélioration des réglages de couleur, masquage d'éléments de l'en-tête, et plus.
12/12/2025
📱 iOS app 1.49.4 released on App Store
NEW: shutter button has been replaced by tap anywhere on the screen with text you can customize on the Language page
NEW: added a setting to have the app pause between photos when taking multiple photos (tap to continue)
IMPROVED: when a Print.Events printer gets connected after being disconnected, the app notices the change faster than before
FIXED: we reverted a change in the last update that caused your customized Gallery button to be a wrong size
12/8/2025
🎄 Nano Banana Pro et de nouveaux réglages sont disponibles sur la page AI Prompts. En savoir plus.
12/7/2025
📱 iOS app 1.49.3 released on App Store
NEW: an LED setting for when the gallery is open
NEW: a setting to move the cards in the guest flow from the bottom of the screen to the top
NEW: guests can enter their info while they are waiting for AI Prompt images to load
NEW: support for Nano Banana Pro
FIXED: now you can print to Print.Events when your iPad has its hotspot turned on
FIXED: now you can add printers that require IPPS, like the Epson XP-7100
FIXED: the app would erroneously say that local network access was missing if Personal Hotspot was turned on
FIXED: a rare crash when adding a printer
FIXED: the guest idle timer wasn't working for AI Prompt or AI Portrait flows
FIXED: when data collection was turned on after capture, there was no way to cancel all the way out of the flow
FIXED: when using Capture Station mode, data collection wasn't working for AI Prompts
FIXED: when using Capture Station mode and opening the Gallery from the in-event menu, tapping a photo wouldn't do anything
IMPROVED: if you have a lot of events on your account the app will load faster
IMPROVED: you can enable AI Portraits without needing to turn on email or text share actions
11/18/2025
📱 iOS app 1.49.2 released on App Store
FIXED: could not open in-event menu when Kiosk Mode was on
FIXED: hiding printers shared by Print.Events was not working
FIXED: a rare crash in the camera settings
FIXED: several crashes related to printing
11/10/2025
📱 iOS app 1.49.1 released on App Store
IMPROVED: the app will warn you if you haven't granted it local network access when you try to add a printer
IMPROVED: if you set a print limit on the event and the limit is reached, the print button will show a warning icon
IMPROVED: you no longer need to configure your ethernet settings if your iPad is connected to Print.Events over ethernet
IMPROVED: when taking multiple photos, the previews that show near the bottom look nicer
FIXED: an issue that could cause the app to take longer to start up
FIXED: if you closed the printer troubleshooter while it was pinging the app could crash
FIXED: on slower iPads the app could hang if you quickly exited the event after finishing a guest session
FIXED: a crash if printing with the foreground printing method
FIXED: several rare crashes from the device camera
FIXED: if you used a custom attract screen as the background of the homescreen you might briefly see a white flash when the user picks the capture type
11/5/2025
📱 iOS app 1.49.0 released on App Store
IMPROVED: adding & managing printers is easier than ever
NEW: printer job management for AirPrint printers
NEW: when selecting an AirPrint printer that offers multiple paper sizes/trays or margins, you can choose the specific option
NEW: see media count remaining for specific DNP printers connected with Print.Events
NEW: printer troubleshooter helps you figure out what's wrong when your printer doesn't appear in the list
NEW: hide printers you never want to add, so they don't bother you later
NEW: easily open your print server's page in a browser from the app (AircastPro, DNP WCM Plus, etc)
NEW: a setting to allow printing even when printer is in an error state (prints will queue in the app), which is on by default
NEW: when AirDrop is selected, the guest will see instructions on how to set their iPhone to "Everyone for 10 minutes"
CHANGED: the passcode is required to open the in-event menu, instead of only being required to exit the event. This prevents guests from messing with printer/camera settings if they discover the in-event menu. Your passcode will be remembered for 1 minute to make things easier.
CHANGED: the "brighten live view" camera setting now prompts you to help you understand you should be doing this on your camera, if your camera is capable. We also fixed an issue with this feature on slightly slower cameras like the M50.
FIXED: if an idle timeout fired in a certain configuration, the background would not show the liveview anymore
FIXED: an issue that could cause the camera to disconnect after the first photo of a series was taken
FIXED: an issue that could cause changing the camera settings to not work
FIXED: data collection after capture was not working for AI Prompts
FIXED: videos did not have sound in the in-app Gallery
FIXED: an issue that could cause the app to freeze if you had a lot of scenes available and guests chose many of them over time
FIXED: a crash if you had a background attract screen with a video, usually on devices with less RAM
10/14/2025
📱 iOS app 1.48.2 released on App Store
FIXED: a crash on app startup if your event had a lot of new things to download
FIXED: an issue that stopped the "Disable looks good screen" setting from functioning correctly
CHANGED: JPG DPI metadata changed from 144->300, to fix some print servers
10/10/2025
📱 iOS app 1.48.1 released on App Store
FIXED: an issue in the last update caused the attract screen to show when it should not, if you used an attract screen for the background
FIXED: the app could get stuck when making an AI photo if the generation process failed
IMPROVED: when choosing a template in the app, you can see which templates have AI prompts on them
IMPROVED: if there's just one AI prompt, the guest no longer has to choose it
10/8/2025
🚀 Notre nouvelle fonctionnalité AI Prompts est disponible en bêta ouverte. Elle nécessite la version 1.48.0 de l'application iOS. Nous avons hâte de voir ce que vous allez créer !
📱 iOS app 1.48.0 released on App Store
NEW: support for our new AI photos: AI Prompts
FIXED: attract screen would not show on macOS
FIXED: auto-generated GIFs became unstable in the last update
FIXED: salsa 1 LEDs would not connect if your device had been renamed away from its default. You may still need to contact support if your device has an unusual name.
FIXED: a crash in camera settings
FIXED: stickers weren't sorted
FIXED: if a guest walked away when the email/sms entry screen was showing, the idle timer would not fire
FIXED: in Capture Station mode the gallery could not be opened from the in-event menu
10/1/2025
💰 Nous acceptons désormais les paiements par Klarna et prélèvement SEPA (UE uniquement)
9/18/2025
📱 iOS app 1.47.0 released on App Store
NEW: we've added 2 more aggressive stabilization modes for slow-mos, and a setting to control stabilization. You'll find it in the middle page of event settings.
FIXED: the guest would be able to choose a color filter even though the template editor would show no color filters are selected
FIXED: if you set a very short guest idle timeout, it could get hit while a video was processing (ie. selecting a scene)
FIXED: AirDrop was not shown correctly on macOS
FIXED: if you turned on cropping of originals, auto-generated GIFs were broken. We've added a warning next to this setting: if you're cropping the originals, GIFs will only be auto-generated if your photo areas in your template are exactly the same size.
FIXED: if your first test capture in the camera settings failed, you would have to restart the app
FIXED: an issue that could cause a photo to fail to download
9/8/2025
📱 iOS app 1.46.4 released on App Store
CHANGED: you can't launch an event with a capture type (like "slow-mos") enabled if there are no templates that work with that capture type (for example, because you disabled that capture type in the only template's advanced settings)
FIXED: an issue that could cause the app to only show a spinner and not continue when pressing a capture mode like "Photo"
FIXED: the Send button was missing on an iPad Mini in landscape orientation when trying to enter a phone number
FIXED: the app could show an error message when trying to start a video, boomerang, or slowmo if the connected camera was older or slower
FIXED: the '+' button on the iPhone looked... gnarly
FIXED: the app did not allow email addresses with upper-case letters
FIXED: bad things would happen if you pressed two action buttons (like email + text) at the exact same time
8/25/2025
🚫 Vous pouvez désormais désactiver certains types de capture dans l'onglet des réglages avancés de l'éditeur de modèles. En savoir plus.
8/20/2025
📱 iOS app 1.46.3 released on App Store
NEW: support for Bluetooth / LED controllers - Salsa 1 (SP-107E) & SP-630E
IMPROVED: the LED screen shows the same device identifier as shown in other apps (like LED Hue or LED Chord)
FIXED: an issue that prevented trimming videos that were longer than 1 minute
7/29/2025
📱 iOS app 1.46.2 released on App Store
NEW: you can trim video testimonials on the "Looks Good" screen (as well as boomerangs & slow-mos)
NEW: advanced capture controls setting for disabling liveview, which is useful for Nikon cameras that only allow tethered shooting (using the camera's shutter button) when liveview is turned off
IMPROVED: you can now sign in with email+password even if you have a Google/Apple sign-in on your account
FIXED: if you opened camera settings soon after camera connected, it would not show the slow-mo/video settings
FIXED: an issue creating GIFs when you set the originals to be cropped to template
FIXED: a workaround for an iOS issue causing old iPads, notably the iPad 10.5" Pro, to freeze after taking a photo
FIXED: missing Reshoot button when selecting a scene
7/25/2025
📢 Vous pouvez désormais ajouter et mettre en forme du texte dans l'éditeur de modèles et d'attract screens 🔠. Pour ajouter du texte, cliquez sur le bouton « Ajouter du texte » dans l'éditeur. Vous pouvez ensuite le mettre en forme avec les réglages de gauche et écrire directement dans la zone de texte.
7/9/2025
📱 iOS app 1.46.0 released on App Store
NEW: a capture setting to crop original photos
NEW: a setting to disable the "Looks good" preview screen
IMPROVED: if your device is in landscape orientation so it's hard to see your creation, the app will first show the "Looks good" preview screen before going to the sharing screen
IMPROVED: the app won't wait so long when your connected camera's autofocus fails (ie. due to low light)
FIXED: waiting uploads would not process if an event was launched and the uploads were from a different event
FIXED: if you had only one capture type enabled plus the gallery button enabled, the shutter button would get skipped
FIXED: on macOS several windows were the wrong size
FIXED: 2 rare crashes
7/1/2025
📱 iOS app 1.45.3 released on App Store
NEW: Make test slow-mos and test video testimonials on Camera Settings page to dial in your look
IMPROVED: if you remove a printer and later add it again, its settings (insets, which templates print etc) will be remembered
IMPROVED: you can choose which places autoprint happens: capture, share station, gallery
FIXED: the view showing the printers list could become unresponsive if the iPad could not communicate with Print.Events app
FIXED: a rare crash
6/13/2025
📱 iOS app 1.45.2 released on App Store
CHANGED: the "Max prints per session" setting now can be set to unlimited, and defaults to unlimited for new devices
FIXED: a crash on opening an old photo from the gallery
FIXED: the printer row could become unresponsive
FIXED: the app could show an error when changing from one capture type to another
FIXED: after capturing a boomerang, the capture could be lost
FIXED: on slower cameras, autofocus could function poorly
FIXED: the Auto Print feature did not respect the max prints per event setting
FIXED: when using the device camera, your video shutter speed would not be applied correctly
5/30/2025
📱 iOS app 1.45.1 released on App Store
IMPROVED: if you have a gallery passcode set and the "Show passcode with the QR code" setting turned on, the passcode will be shown on the Share Station near the QR code
FIXED: an issue that would cause nothing to happen when touching a photo/video in the Gallery or Share Station
FIXED: an issue that could cause your connected camera's liveview to stop working or not work well if you left the app and then returned to it
FIXED: the QR code popup would show an empty "Passcode:" if you turned the passcode for an event on, and then later turned it off again
FIXED: the local iPad gallery would show grey/empty squares if you deleted photos from the Camera Roll
FIXED: a rare crash that could happen when switching capture modes with a long pause in-between
FIXED: a crash that could happen when an invalid video file is loaded from a camera
FIXED: a crash that could occur if you had a poor internet connection and closed the gallery screen soon after scrolling or opening it
5/22/2025
📱 iOS app 1.45.0 released on App Store
NEW: you can set different settings for your camera (iPad or connected camera) for photos vs slow-mos vs videos. This is really helpful when you are using a flash for photos but constant lighting for videos.
IMPROVED: camera settings are applied to your connected camera more reliably, and we fixed issues with the Brighten Live View feature
IMPROVED: if printing via AirPrint in the background fails, the app will fallback to the iOS foreground print method instead of showing an error message
IMPROVED: video testimonials from your connected camera download much faster
CHANGED: the "brighten live view" feature will tell you to change your camera settings instead of emulating it in software, when the camera supports disabling exposure simulation
FIXED: if you created your account in a region other than the default, Cloud Gallery and Share Station were not working correctly when new photos arrived
FIXED: when using scene blending with SceneSelect, if your photo and scene were not the same orientation then the output did not look... great
FIXED: several issues that could cause the app to hang / freeze, or crash
FIXED: when connecting a slower (older) camera, now there's less chance of the camera failing to connect
5/2/2025
📽️ Vous pouvez désormais créer un lien de diaporama préconfiguré, facile à partager avec d'autres navigateurs, comme une TV connectée ou un écran de borne intégré.
4/30/2025
📱 iOS app 1.44.1 released on App Store
NEW: a setting for GIFs to add a countdown between photos
NEW: support for transparent scenes & blending with the photo background
IMPROVED: when in Capture Station mode, guests no longer have to wait for AI Portrait generation
IMPROVED: you can give the app add-only access to your Camera Roll
IMPROVED: the translations in the app have better quality, especially German
IMPROVED: the glam filter slider has a percentage indicator
FIXED: an issue causing slowness and crashes if you had gigantic galleries
FIXED: memory usage reduced, which fixes crashes on older devices
FIXED: shutter button is too big on iPhone
FIXED: after taking an AI Portrait not all of the actions are shown
FIXED: an issue with the Nikon D7200
FIXED: hard to read the names of printers shared via Print.Events if the printer has a long name
FIXED: setting filters on a public template did not work
4/10/2025
📱 iOS app 1.44.0 released on App Store
NEW: new black & white filters, new sepia filter
NEW: advanced capture control settings for sharpening & video quality
NEW: you can pinch to zoom photos & videos after they are taken
NEW: setting to turn off in-event menu gallery buttons
NEW: setting to control which devices the attract screen shows on, per-event (for example, not on Share Stations)
NEW: setting for maximum number of prints per event (across all devices)
IMPROVED: video output from the app is higher quality, especially GIFs and boomerangs, and file sizes are smaller so your guests get them faster
IMPROVED: video testimonials can now be 5 minutes long
IMPROVED: glam filter and color filters are now set on templates, not the event as a whole. This lets you have different filters available for different templates.
IMPROVED: now you can select multiple color filters that your guests can choose from (instead of one or all)
IMPROVED: Print.Events error messages will give you more information about what is wrong
FIXED: several issues for Print.Events printers
3/28/2025
📱 iOS app 1.43.1 released on App Store
IMPROVED: you can now add Print.Events printers by IP address, and the app remembers the last IP address it connected to
FIXED: AI Portrait buttons on iPhone
FIXED: Canon T6 autofocus
3/23/2025
🖨️ Notre application de serveur d'impression Windows, Print.Events, est disponible sur https://print.events
3/18/2025
📱 iOS app 1.43.0 released on App Store
NEW: support for Print.Events, our new Windows print-server app
IMPROVED: the next version of Share Station is now available, with fluid scrolling & loading. New images/videos load in dynamically as your other devices upload them.
IMPROVED: the Gallery has new options to help you find what you're looking for faster, including grouping by session, sort order, and the ability to change the zoom (grid size)
IMPROVED: when the guest enters an email address or phone number, the confirmation dialog is easier for guests to understand
CHANGED: when you add templates, by default they'll print on already-added printers (before: they would not, so you'd have to choose to allow them to print)
FIXED: an issue affecting Canon T6 and T7 cameras
FIXED: the print popup could show even if printing was disabled, if you'd used autoprint before
📨 Vous pouvez désormais personnaliser le contenu des SMS et des e-mails pour chaque événement
1/12/2025
💻 Vous pouvez désormais utiliser l'application sur macOS. Consultez cet article d'aide pour connaître les points importants et la procédure d'installation
📱 iOS app 1.42.0 released on App Store
NEW: macOS support, please see help article for requirements & limitations
FIXED: only the item printing is shown when you hit "Print" after taking more photos
FIXED: in some cases when taking multiple photos, the liveview guides were not in the correct places
12/15/2024
📱 iOS app 1.41.5 released on App Store
NEW: a setting to disable template preview during photo capture
FIXED: capture buttons could start scrolled off-screen on iPhone
FIXED: the in-event menu was small on iPhone in landscape orientation
FIXED: if you had a custom animated capture button, it could take a while after touching it until the touch was registered
FIXED: LED states for AI Portrait photos
12/14/2024
🎫 Vous pouvez désormais dupliquer facilement des événements entre différents comptes. En savoir plus.
12/9/2024
📱 iOS app 1.41.4 released on App Store
FIXED: an issue that could cause the liveview to be in the wrong place during photo capture
12/7/2024
📱 iOS app 1.41.3 released on App Store
NEW: added 3 new LED states for AI Portraits
IMPROVED: we tweaked the photo quality to make it even better, especially for connected USB cameras
CHANGED: when printing from the gallery opened from the in-event menu, max print copies is not enforced
CHANGED: instead of removing the print button when the max print copies is reached, leave it there and show an alert when the user tries to print again
FIXED: device camera settings would not be applied correctly when an attract screen without liveview was closed
FIXED: the attract screen won't immediately open after guests close the gallery, if they were hanging out in the gallery for a long time
FIXED: if you delete photos/videos from your Camera Roll, the app won't show you annoying grey squares in the local gallery
FIXED: a problem that could cause the attract screen not to show
FIXED: using data collection + the take more feature + shooting from a tethered camera
FIXED: an iPhone in landscape orientation would display the in-event menu wrong
Correction d'un problème qui envoyait les e-mails avec une mauvaise adresse de réponse
11/29/2024
📨 Les changements de réglages e-mail et SMS s'appliquent désormais immédiatement, sans redémarrer l'application
📨 Vous pouvez désormais connecter votre propre compte Twilio depuis la page Compte, réglages SMS. Pour les experts uniquement.
11/26/2024
📱 iOS app 1.41.2 released on App Store
NEW: a setting to mirror photos taken, in Camera Settings
FIXED: in some cases the QR code was not added to the print
FIXED: when selecting a filter the preview image was wrong if you selected a scene then unselected it
CHANGED: the shutter button screen won't be skipped if you have a background attract screen without liveview
11/25/2024
📱 iOS app 1.41.1 released on App Store
NEW: added a setting for showing the passcode on the QR screen, which is off by default. This setting is on the last page of event settings, near where the passcode is shown.
IMPROVED: on the camera settings screen the entire frame will now always be shown regardless of your settings - including live view feed and photos taken. This will help you set up your booth faster.
FIXED: video testimonials from a connected camera could fail to download
FIXED: when shooting videos directly on the camera (tethered shooting), the template was not applied correctly
FIXED: in a special case, changing the event of an iPad in Kiosk Mode might not take effect
FIXED: a crash on adding a printer
FIXED: when selecting a scene, the preview square at the bottom did not show correctly
11/24/2024
📱 Application iOS 1.41.0 disponible sur l'App Store : cette mise à jour change la façon d'ajouter les imprimantes dans l'application et prend en charge plusieurs imprimantes. Merci de regarder la vidéo pour découvrir les nouveautés.
11/6/2024
📱 Application iOS 1.40.1 disponible sur l'App Store : corrections pour l'impression, les écrans de galerie, les AI Portraits, et plus
10/31/2024
📱 Application iOS 1.40.0 disponible sur l'App Store : galerie invité pendant l'événement (désactivée par défaut), corrections AI Portrait et nouveau réglage d'apparence pour les enfants, et plus
10/24/2024
📱 Application iOS 1.30.3 disponible sur l'App Store : prise en charge de la fonctionnalité AI Portrait, plusieurs problèmes corrigés.
🤯 Notre bêta AI Portrait est désormais disponible pour les membres Pro+ ! Pour commencer, modifiez un modèle et ajoutez des filtres AI.
10/9/2024
📱 Application iOS 1.30.1 disponible sur l'App Store : plusieurs problèmes corrigés. Cette mise à jour est importante pour les iPad anciens et non Pro.
9/30/2024
🎞️ Vos galeries permettent désormais de faire défiler tous les médias, ainsi que de supprimer des médias individuels des sessions de vos invités. Nous avons aussi déployé un nouveau design pour le menu et les filtres de la galerie, et ajouté la possibilité de télécharger un fichier en cliquant sur un bouton de téléchargement sur chaque image.
9/11/2024
📱 Application iOS 1.30.0 disponible sur l'App Store : nouvelle fonctionnalité « Prendre plus », grandes améliorations des slow-mo, et plus
7/15/2024
📱 Application iOS 1.29.3 disponible sur l'App Store : corrige un problème de visée en direct
7/11/2024
📱 Application iOS 1.29.2 disponible sur l'App Store : corrige un problème d'aperçu de modèle pendant la capture
7/9/2024
📱 Application iOS 1.29.1 disponible sur l'App Store : améliorations de la collecte de données et quelques corrections
6/26/2024
De nouvelles ressources marketing sont disponibles sur la page Compte !
6/24/2024
Vous pouvez désormais retirer le message de désinscription des SMS via les Paramètres de partage sur la page Compte.
6/19/2024
📱 Application iOS 1.29.0 disponible sur l'App Store : ajoute un réglage permettant d'imprimer un QR code renvoyant l'invité vers ses photos
Les clients en Malaisie et en Indonésie peuvent désormais utiliser la fonctionnalité SMS de l'application
6/13/2024
📱 Application iOS 1.28.0 disponible sur l'App Store : affiche un bref aperçu photo pendant la capture, affiche les modèles à 1 photo en direct pendant la capture, ajoute un réglage empêchant la détection de visage de fermer l'attract screen
6/10/2024
📱 Application iOS 1.27.0 disponible sur l'App Store : de nombreuses nouveautés, dont SceneSelect pour les slow-mo, les vidéos et les boomerangs
4/23/2024
🚀 Les événements gratuits expirent désormais au bout de 7 jours au lieu de 3, nous avons modifié les forfaits et les achats (en savoir plus), et l'envoi d'un SMS de test vous indiquera si vous tentez d'écrire vers un pays trop coûteux pour votre forfait.
4/17/2024
🌄 Notre nouveau design de galerie est désormais celui par défaut ! Merci à toutes celles et ceux qui nous ont fait part de leurs retours. Il n'a jamais été aussi simple pour vos invités d'explorer et de partager leurs photos.
4/16/2024
📱 Application iOS 1.26.3 disponible sur l'App Store : corrections pour les LED pendant la création de GIF et nouveau réglage pour placer la collecte de données après la prise de photo
4/1/2024
📱 Application iOS 1.26.2 disponible sur l'App Store : corrige l'affichage de filtres qui ne devraient pas apparaître, et le modèle absent de l'aperçu slow-mo
3/25/2024
🎖️ Nouvelle fonctionnalité : les Webhooks. Nous avons rédigé un guide pour utiliser cette fonctionnalité avec IFTTT afin d'intégrer Booth.Events à Dropbox. Avec cette intégration, vous pouvez enregistrer sur votre Dropbox chaque fichier envoyé dans vos galeries.
2/28/2024
📱 Application iOS 1.26.1 disponible sur l'App Store : nouveau réglage de rotation manuelle de la visée en direct, boutons de capture compatibles APNG (PNG animé), et plus
2/13/2024
📱 Application iOS 1.26.0 disponible sur l'App Store : 9 nouveaux filtres couleur, les invités peuvent choisir leur filtre, photos plus nettes et plusieurs corrections
1/29/2024
📱 Application iOS 1.25.0 disponible sur l'App Store : Glam Filter avancé par apprentissage automatique, aperçu N&B en direct, vidéos plus longues et plusieurs corrections
12/16/2023
📱 Application iOS 1.24.5 disponible sur l'App Store : corrige un problème empêchant certains appareils Sony de prendre des photos
12/13/2023
📱 Application iOS 1.24.4 disponible sur l'App Store : corrige plusieurs problèmes et améliore plusieurs aspects, dont le fonctionnement du sélecteur de modèles
12/5/2023
📱 Application iOS 1.24.3 disponible sur l'App Store : corrige un rare problème de déconnexion, ajoute la prise en charge de nouveaux appareils, fait de l'impression un réglage de l'iPad/iPhone plutôt que de l'événement. Remarque : si l'impression est activée, vous devrez la réactiver après la mise à jour.
11/20/2023
📱 Application iOS 1.24.2 disponible sur l'App Store : corrige un problème de modèles sur les anciens iPad
11/14/2023
📱 Application iOS 1.24.1 disponible sur l'App Store : clavier numérique de saisie du téléphone amélioré, qualité des modèles améliorée
11/8/2023
📱 Application iOS 1.24.0 disponible sur l'App Store : prise en charge du déclenchement depuis l'appareil photo, ajout de nouvelles options d'impression des modèles. Voir la vidéo
L'éditeur de modèles prend désormais en charge les options d'impression : vous pouvez indiquer à l'application qu'un modèle ne peut pas être imprimé, ou qu'il s'imprime en 2-up (2x6 -> 2x2x6). Voir la vidéo
10/23/2023
📱 Application iOS 1.23.0 disponible sur l'App Store : qualité photo améliorée dans les modèles, progression affichée lors du traitement des vidéos, nouvelles options de connexion.
10/13/2023
📱 Application iOS 1.22.4 disponible sur l'App Store : contient une nette amélioration de la qualité des photos et vidéos placées dans un modèle.
10/2/2023
📱 Application iOS 1.22.2 disponible sur l'App Store : corrections
9/9/2023
📱 Application iOS 1.22.1 disponible sur l'App Store : contient une correction importante pour l'impression vers des appareils non certifiés par Apple, comme la DNP WCM
9/5/2023
📱 Application iOS 1.22.0 disponible sur l'App Store : qualité du slow-mo améliorée avec un appareil USB, possibilité de personnaliser le bouton GIF, prise en charge du vietnamien, de la collecte de données et du mode kiosque
📮 La collecte de données est lancée : définissez les données que l'application doit demander à vos invités, et lesquelles sont obligatoires ou facultatives. Découvrez comment ça marcheCela remplace la fonctionnalité de consentement. Si le consentement était activé pour vos événements, vous devez activer la collecte de données à la place
🎖️ Le mode kiosque est lancé : gérez les événements lancés sur vos iPad depuis la page Appareils et Téléchargements. Découvrez comment ça marche
8/2/2023
Application iOS 1.21.0 disponible sur l'App Store : prise en charge de 9 nouvelles langues, prise en charge des appareils USB filmant en orientation portrait, performances boomerang/slow-mo améliorées pour certains appareils USB dont les Canon EOS et M-50, et corrections.
🎉 Les durées de conservation augmentent ! Les événements Pro passeront à 1 an au lieu de 2 mois, et les événements Pro+ à 2 ans au lieu d'1 an.Si vous êtes abonné, ces changements s'appliqueront automatiquement à tous vos événements au prochain renouvellement (voir la page Facturation pour savoir quand). Si un événement expire avant votre prochain renouvellement, contactez-nous et nous le mettrons à niveau pour vous. Utilisez le bouton « ? », appuyez sur « Ask », et n'oubliez pas de nous copier-coller le lien de votre événement depuis votre navigateur.Si vous venez de créer un événement à partir d'un crédit d'événement, contactez-nous et nous le mettrons à niveau gratuitement - pourquoi n'auriez-vous pas droit aux bonnes choses ? Utilisez le bouton « ? », appuyez sur « Ask », et n'oubliez pas de nous copier-coller le lien de votre événement depuis votre navigateur.
🎉🎉 L'abonnement annuel Pro+ est lancé : vous pouvez désormais payer un tarif annuel avantageux pour Pro+. Si vous changez depuis un abonnement existant, le temps déjà payé sur le mois vous sera automatiquement crédité.
7/12/2023
Vous pouvez voir les décors d'un modèle lorsque vous le consultez
7/11/2023
Application iOS 1.20.1 disponible sur l'App Store : corrige un problème avec les appareils USB, en particulier les Sony, pouvant empêcher le téléchargement des photos
7/10/2023
Application iOS 1.20.0 disponible sur l'App Store : SceneSelect (fond vert) fonctionne désormais sur tous les appareils, y compris ceux connectés en USB. Si vous ne souhaitez pas utiliser cette fonctionnalité, retirez les décors de votre modèle.
🎉 Les abonnés Pro+ bénéficient de 4 iPad inclus dans leur abonnement au lieu de 3. Si vous êtes abonné Pro+, ce changement prendra effet au prochain renouvellement de votre abonnement.
7/3/2023
Application iOS 1.19.8 disponible sur l'App Store : correction de l'impression automatique quand aucune action n'était activée
Vous pouvez désormais faire défiler votre liste d'événements sans fin, pour retrouver d'anciens événements dont vous ne connaissez pas le nom
Plusieurs améliorations de la recherche d'événements et de modèles vous aideront à retrouver vos événements plus facilement
Le sélecteur de modèles (quand vous changez les modèles d'un événement) a été revu pour faciliter la désélection
Correction d'un problème rendant impossible le retrait d'un modèle d'un événement si vous aviez déjà supprimé ce modèle
6/22/2023
Application iOS 1.19.7 disponible sur l'App Store : correction d'un problème pouvant bloquer l'application lors de l'enregistrement d'une vidéo avec le son
6/20/2023
Application iOS 1.19.6 disponible sur l'App Store : correction d'un problème empêchant les iPad en orientation paysage d'envoyer des SMS
6/13/2023
Application iOS 1.19.5 disponible sur l'App Store : améliorations de l'expérience invité et correction du compte à rebours vidéo qui ne s'affichait pas toujours
5/26/2023
Diaporama de galerie amélioré : le diaporama par défaut propose maintenant une animation façon Ken Burns, avec l'option 2-up pour les écrans aux proportions extrêmes (par exemple les bornes à écran intégré 540x1920)
5/23/2023
Application iOS 1.19.3 disponible sur l'App Store : basculement photos/slow-mo accéléré sur iOS 12, correction du scintillement des aperçus de modèle quand un appareil USB est connecté
Le CSV des données invités inclut désormais les données des sessions supprimées
5/11/2023
Application iOS 1.19.2 disponible sur l'App Store : la configuration de l'imprimante a été revue et plusieurs bugs corrigés. Vous devrez ajouter à nouveau votre imprimante si vous imprimiez sans la fenêtre iOS manuelle.
Le CSV des données invités inclut désormais les noms de fichiers, pour savoir pour quels fichiers vous avez reçu un consentement
Un problème empêchant la Share Station d'imprimer a été corrigé (aucune mise à jour de l'application requise)
5/2/2023
Application iOS 1.19.1 disponible sur l'App Store : plusieurs petites corrections, vitesse de mise à jour de la carte de sélection de modèle améliorée
4/26/2023
Application iOS 1.19.0 disponible sur l'App Store : les GIF sont là ! Aussi : prise en charge du slow-mo et du boomerang avec votre appareil connecté en USB (sur activation)
4/11/2023
Application iOS 1.18.0 disponible sur l'App Store : nouvelles options de consentement, prise en charge des LED Mobibooth, reprise de photo améliorée, minuteur d'inactivité corrigé
3/26/2023
Application iOS 1.17.1 disponible sur l'App Store : QR code accéléré, corrections
3/22/2023
Application iOS 1.17.0 disponible sur l'App Store : nombreuses améliorations du déroulé de prise de photo et vidéo
2/22/2023
Application iOS 1.16.0 disponible sur l'App Store : prise en charge du contrôleur LED SP110E, corrections
Diaporama de galerie mis à jour : nouveau « mode Ken Burns 2-Up », idéal pour les grands écrans
2/2/2023
Application iOS 1.15.6 disponible sur l'App Store : version corrective
1/23/2023
Diaporama de galerie mis à jour : vous pouvez maintenant le lancer sur une galerie vide avant tout envoi, et vos fichiers s'affichent au fur et à mesure. Il est aussi plus fluide sur les très grandes galeries.
12/20/2022
Les abonnés Pro+ peuvent désormais connecter leur propre domaine pour que les invités consultent vos galeries sur [quelquechose.]votredomaine.com. Voir la page Compte.
12/12/2022
Ajout des statistiques de session sur la page Événement, et sur la page Galerie pour les visiteurs connectés à la galerie ou utilisant le Super Passcode.
12/7/2022
Les abonnés peuvent désormais changer le nom figurant sur les reçus depuis la page Facturation
12/5/2022
Application iOS 1.15.5 disponible sur l'App Store : version corrective
De nouveaux modèles de fêtes sont disponibles sur la page Modèles
Les invités peuvent désormais changer l'ordre de tri de la galerie, du plus ancien au plus récent ou l'inverse
Les nouveaux événements que vous créez n'utiliseront plus un modèle au hasard si vous n'avez pas encore créé le vôtre ; les modèles « Plain » leur seront attribués par défaut.
12/2/2022
Correction d'un problème empêchant l'ouverture d'un événement dans l'application web quand on avait beaucoup d'événements
Correction d'un problème permettant à un invité d'accéder à la galerie alors qu'il ne le devait pas, s'il venait d'une page de session valide
11/28/2022
Nouvelle fonctionnalité pour les abonnés Pro+ : HTML personnalisé sur les landing pages (pages de session et de galerie). À retrouver dans Modifier l'événement -> Identité visuelle.